Rough Cut Mower AcrEase Features:
- 57″ Cutting Width
- 27 HP Briggs & Stratton Commercial Grade Twin Cylinder Engine
- Commercial Grade Deck Assembly
- 4 Tire Design
- Quick Two Crank Height Adjust System
- Height Adjustment Range From 2″ to 8″
- Electric Clutch Blade Engagement
- Conservative 2″ Diameter Sapling Rating
- Pull Directly Behind or Fully Offset to the Side of the Tow Vehicle.
Features
27HP Briggs & Stratton Commercial Turf commercial grade twin cylinder engine
The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 30mm (1-3/16") steel shafts, machined steel blade holders and large sealed ball bearings.
The cutting height can quickly and easily be adjusted from 2"-8" with the two crank height adjustment system.
The main deck is built out of 10 GA (.135") thick steel with a 1/4" thick steel top plate for reinforcement. An additional 1/4" thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just over 5/8" thick.
Unique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching.
The blades are engaged with an electric clutch which is activated by simply pulling a switch. Electric clutches can extend the life of the belt and reduce overall belt maintenance.
The tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain.
Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run time.
Specifications:
| MODEL | MR55BE | ||
| Class Mower | Rough Cut (Rear Discharge) | ||
| Engine Make | OHV Briggs & Stratton Commercial | ||
| Engine Model | Commercial Turf Twin | ||
| Engine HP | 27 | ||
| Lubrication Method | Pressure With Filter (Low Oil Pressure Shut-Off Included) | ||
| Air Filter Type | Cyclonic Air Filtration System | ||
| Electric Start (Battery not included) | Yes | ||
| Hour/Tach Meter | Optional | ||
| Number of Mower Blades | 2-30″ | ||
| Blade Tip Speed (ft/mm) | 19000 | ||
| Cutting Width | 57" | ||
| Cutting Height | 2.0 to 8.0 By Two Cranks | ||
| Hitch | Direct Behind or Full Offset to Either Side | ||
| Blade Engagement Clutch | Electric Clutch | ||
| Deck Metal Thickness | 10 GA (.135″) | ||
| Deck Top Plate Thickness | Two 1/4″ Thick Plates | ||
| (Blade Spindle Attachment Area) | |||
| Weight | 580 lbs | ||
| Pneumatic Fixed Rear Tires | 15/600×6, 4 Ply Tubeless (Flat Proof Option Available) | ||
| Pneumatic Front Tires on Casters | 5.30/4.50×6, 4 Ply Tubeless (Flat Proof Option Available) | ||
| Fuel Tank Size | 3 Gal. | ||
| Blade Spindles | |||
| Shaft Size | 30 mm (1-3/16″) | ||
| Bearing # | 6206-2RST | ||
| Drive Method | 1 B Section "V" Belt (Kevlar) | ||
| Warranty | 1 Year Commercial | ||
| Warranty – Engine | 3 Year Commercial | ||
| 2022 Suggested List Price (U.S. Dollars) | |||
| Base Model (Including Tongue) | $5045 | ||
| Optional Wetlands Kit | $645 | ||
| Optional Electric Lift Kit | $770 | ||
| Optional Floatation Kit | $360-$490 | ||
| (*FOB Mendota, IL) (Note: Model MR55BE is not for sale in California) | |||
| *Prices do not include shipping costs and may vary in different locations. | |||
|
*Kunz Engineering reserves the right to change specifications or discontinue products without notice. |
Accessories
Floatation Kit
- An extra front and back tire can be added to the center section of the mower deck.
- Great for mowing around ponds and on rough uneven ground where scalping would normally occur
- Clamping style receiver allows for adjustments from side to side with both the front and rear tires
- Pinned receivers make for quick kit removal when not needed
- Works on all existing and new rough cut mowers
Wetlands Kit
- The Wetlands Kit consists of an extra set of tires and mounting brackets.
- Great for wetlands or marshy areas that stay wet all year around
- Works well in combination with small personal amphibious vehicles and ATVs/UTVs with tracks
- Kit more than doubles the tire surface area in contact with the ground
- Easy to install. Works on all existing and new rough cut mowers.
- The rough cut mower will not float with the wetlands kit installed. Water greater than 2-3″ in depth should be avoided.
- With the Wetlands Kit installed the minimum cutting height is 3.5″-4″.
- Works on all existing and new rough cut mowers
